How to use the EPS pre-expander machine correctly? EPS with the full name Expanded polystyrene is a rigid porous plastic that can be found in many shapes and applications. It is most commonly used in fish boxes, consumer goods packaging and building insulation boards. To make high-quality EPS you ne

EPP Material IntroductionExpanded Polypropylene Material is a highly crystalline polymer/gas composite with excellent performance. With the progress of production technology, according to different uses, different methods can be used to obtain different density and pore size of EPP materials

Lost foam casting (LFC) is a new technology with precise forming, no need mould ,no parting line on the surface, no sand hole, no edge, less tolerance and less manufacturing step. Comparing the traditional casting technology, LFC has many advantages. The LFC applied widely especially in the auto and

How To Save Cost For The EPS Moulding Machine Packaging Factory 1.Cooling water system of EPS moulding machine packaging factorySeparate the cooling water for mould with the water for vacuum. Using a high efficient vacuum system, the machine should mainly rely on vacuum cooling while considering wa

EPS decoration /coating is mainly used in door pocket, window pokect, corners line, blet line and portico parts of villa, Hotel and business street building. It was updated from traditional GRC component epoch-making product. In 80s , started and widely used in Europe and Amercia markets. Normally,

EPS foam products have wide application fields in heat insulation, food and Electronics packaging and building decorates terms and so on, considering the local situation in Angola, expect contruction insulation board, we recommend some products for clients reference as follows.

1, The explanation of Efficiency and Energy saving Nowadays, Every machine manufacturer talked about energy saving and Efficiency comparison, which is much better with actual cycle time and energy consuming in EPS factory. Which also make a big confusion for the buyer’s choice. Actually, As you k

As demand for foam increases, so does the need for EPS molding machinery. But the demand for foams is higher and higher, so the demand for EPS molding machine is higher and higher, and the technology of polystyrene molding machines is improving. Overall, the development of a bubble EPS molding machinery.

EPS has been widely applied for the building constructions in many different countries. Also there are different types of application for both external insualtion and roof insualtion such as I.C.F, 3D wire mesh panel and Roof Panel.Here, we would like introduce the roof system with EPS as below.Regr