English
Español
Pусский
简体中文

EPS machine
You are here: HOME » EPS machine

GUIDE TO EPS MACHINE

Fangyuan Turn-Key EPS Plant 
EPS machine include EPS Pre-expander Machine, EPS Shape Moulding Machine, EPS Block Machine, EPS Cutting Machine etc.

What is EPS Machine

Do you know how styrofoam formed? Styrofoam molding machine can process all kinds of bubbles, from this page you will know what EPS shape molding machines are.
EPS machine is refers to polystyrene foam manufacturing. Whole set of EPS machine equipment includes presets, sheet and automatic forming machines, cutting machines, recycling granulators and auxiliary equipment.
The EPS machine can be divided into intermittent and continuous preset. And automatic shape molding machine is divided into SPZ100-200 - A/B series, SPZ100-200 T series, SPZ100-200E energy saving high efficient series, and SPZ100-200 FHS series. They form variety of models, widely used in electric foam packaging, fruit and vegetables foam box, bubble chamber of aquatic products and various packaging products.
Method of EPS machine is to put raw material into the material foamed by steam or electric heating.Then foaming material is transported into plastic molding machine and molded products. Finally, product is cut or dried, and EPS machine products are sent to cutting machine or drying system.
When using this machine with good grounding protection, check whether screws loose, spindle rotating flexibly, motor and wiring installed correctly.

Working Theory of EPS Machine

EPS raw materials were prepared by foaming, drying and curing. After foaming and stable forming materials were sent into the mold. Then the steam was heated and fused to form. After cooling and shaping, the foam products were molded to complete the production process.


 


Start from EPS beads through expanding and aging process, they would be injected into EPS machine. With air, steam and water EPS product come out.

EPS Machine Video

This browser does not support the video element.

High Efficiency Shape Moulding Machine

This browser does not support the video element.

Fast Mould Change styrofoam moulding machine

This browser does not support the video element.

Vacuum Pre-expander Machine


EPS Machine Using Area

Packaging

Vegetable and fruit box, fish box, electronics packaging

Building
Sandwich panel, 3D Panel, Brick insert,
Insulated Concrete Foam (ICF).

Plastic Foam Flotation
Float

Decorating
Cornices, Ceiling tiles, Articles in arts and decoration

Protecting
Anti-freeze pad to cushion foundations of roads and railways in high cold region

Filter Material
Applicable in medium and small scaled water supply system

Other Applications
Applicable in seeding nurseries for hydroponics; Mixed with clay and cement to manufacture lightweight wall titles and cement castings; As filling material for pillow

Featured EPS Machine

EPS styrofoam moulding machine

Fully Automatic Fast Mould Change Eps Foam Plastic Thermocol Plate Making Machine for Styrofoam Packaging Line

The low consumption eps styrofoam moulding amchine is a new type product, which integrates high efficiency and low consumption process. The EPS thermocol making machine is equipped with a insulated steam chamber and a quick mold changeover structure, as well as prearrangement for manipulator.


 

READ EPS Styrofoam Moulding Machine

EPS shape molding machine

Fangyuan automatic vacuum expandable polystyrene eps shape moulding packing machine

E type machine with hydraulic system achieves faster operation for 250mm/second.
Adopts efficient vertical vacuum system which ensures ＜10% water content in the products.
It controls the steam pressure by balance valve and pressure sensor to make easy and accurate control.
All electronic parts, valves, gauges and hydraulic system are sourced from international brands with high quality 
ensuring stable and smooth running.

 

READ EPS Shape Molding Machine

EPS pre-expander machine

EPS expandable polystyrene pre expander foaming machine with vacuum

 Intelligent I-PC system, friendly user interface, and equipment production and product life cycle management.
 Intelligent fuzzy PID control system for precise density control.
 Precise weighing system allowing self-tuning density feedback.
 Shortest curing time.
 Stable and reliable equipment running.

 

PROVIDE MORE MACHINERY SOLUTIONS FOR CUSTOMERS IN NEED

86-15990063230
Other ways to get in touch

EPS Machine Engineering

Fangyuan EPS shape moulding machine turn-key project in China.

With proper machine, mold and substance running layout and high availability, neat and beautiful.
 

Fangyuan EPS styrofoam moulding machine turn-key project in Algeria.

Ethernet networking interface and intelligent system upgrading and expansion.

Advanced multi-stage heating control system for precise pressure control.

Original vacuum generation system and unique non-pressure mould stripping technology.
 

FAQ for EPS Machine

  1. Things You Should Know about EPS

EPS Fish Box Production Line Layout

For industrial packaging manufacturers, transitioning from single-machine operations to a fully integrated EPS Fish Box Production Line requires more than just purchasing equipment. It demands precise spatial organization and rigorous utility engineering. You cannot simply place machines on a factor

About Us
Xindeng Industrial development area,fuyang,Hangzhou city,Zhejiang province,China
Quick Links
Contact Us
Copyright © Hangzhou Fangyuan Plastics Machinery.Ltd.All rights reserved.